This device is a portable meter. It is capable of measuring coating thickness quickly, precisely and without injury, both for the laboratory and engineering environment. It is currently widely used in manufacturing, metal processing industry, chemical industry, commodity inspection and testing fields; and is essential for material protection major.
This device meets the following criteria:
GB/T 4956─1985 non-magnetic coating thickness measurement on magnetic metal substrate, Magnetic Method
GB/T 4957─1985 non-conductive coating thickness measurement on non-magnetic metal substrate, Eddy Current Method
JB/T 8393─1996 magnetic and eddy current coating thickness
JJG 889─95 "Reluctance thickness "
JJG 818─93 "Eddy Current Thickness"
Thickness measurement using both Magnetic Method and Eddy Current Method to measure the non-magnetic coating on a magnetic metal substrate, or non-conductive coating on non-magnetic metal substrate.
There are 7 types probes: F400、F1、F1/90°、F10、CN02、N1
There are two measurement ways：CONTINUE; SINGLE
There are two working modes：DIRECT; GROUP(A-B)
There are five statistic values: MEAN、MAX、MIN、FREQUENCY、S．DEV
There are two calibration modes and the basic one can amend the probe system deviation.
It has storage function which can save 495pcs data.
It has delete function,which can delete any single questionable data or cancel all stored data in order to make new measurement.
It can set limitation which will autoalarm if beyond the range and make analysis by column diagram.
It’s connectable with thermal printer, which can print measurement data、statistic value and limitation.
It has the function of communication with a PC, measurement and statistics can be transfer to the PC, so that the data may be for further processing.
Speaker beep while operating.
Have error hint function, through the screen or hum.
Power-off automatically when idle; manually power-off available.
Communication line and the data processing software
GT980 Coating thickness gauge optional probes parameter table